Penang electrician prices from RM10
Use these advertised prices in Penang to plan your budget. For example, fitting a basic filament light at an existing point starts at RM10. Ask your electrician to confirm the total before work begins.

Starting prices by job in Penang
These are starting prices for the jobs shown. Ask whether the quote includes the fitting, materials, new wiring and any minimum visit charge.
- Fit a basic filament light at an existing point
- From RM10per light
- Install a downlight, including the ceiling cut-out
- From RM30per light
- Install a standard three-blade ceiling fan
- From RM40per fan
- Install a four- or five-blade ceiling fan
- From RM45per fan
- Install an 8- to 20-way single-phase board, including parts
- From RM450per board
Four factors that affect the quotation
Understanding these helps you give a useful enquiry and get an accurate quote.
Scope of Work
A single socket replacement is far less than a full house rewire or a distribution board upgrade. The provider scopes the job before quoting.
Access & Placement
Surface-mounted fittings and easy-to-reach points cost less than concealed wiring, high ceilings or work that needs hacking and making good.
Parts & Materials
Breakers, cables, fittings and dedicated isolators vary in cost. Brand and rating choices affect the materials portion of the quote.
Time Required
Intermittent fault tracing across several circuits, or three-phase board work, takes more diagnostic time than a straightforward fitting swap.
What to expect by service
Each service is quoted on its own merits. These notes explain what the provider assesses and what can move the price.
Power Trips & Fault Finding
A main switch that keeps tripping or a circuit that won't stay on usually points to an overload, a short circuit or deteriorating wiring. We help Penang households and businesses arrange fault-finding visits with independent electrical service providers so the cause can be identified before any repair is approved.
Quote depends on: Whether the fault is isolated to one point or affects a whole circuit., Access to concealed wiring, conduit and the distribution board., Parts required, such as a replacement MCB, socket or cable section., Time taken to trace intermittent faults..
Switches & Sockets
Wall switches and power points wear out, loosen over time or suffer heat damage from overloaded outlets. We help arrange repairs and replacements with independent electrical service providers across Penang, from a single faulty socket to a set of ageing outlets in an older home.
Quote depends on: Number of points to repair or replace., Surface-mounted versus concealed-box work., Whether new points need fresh cable runs., Type and brand of fittings you choose..
Lighting & Ceiling Fans
New light fittings and ceiling fans improve comfort and energy use, but both need secure mounting and correct wiring — especially fans, where a ceiling box must carry the weight and vibration. We help arrange installation and replacement with independent electrical service providers in Penang.
Quote depends on: Number and type of fittings or fans., Whether an existing point is being used or a new one is needed., Ceiling access and mounting requirements., Brand and model of the fitting or fan..
Wiring & Rewiring
Many older Penang homes still run on ageing PVC or rubber-insulated cable that has hardened or lost its earth path. Rewiring is a larger, multi-stage job, so we help arrange a proper assessment with an independent electrical service provider before any work is approved.
Quote depends on: Partial versus whole-house rewiring., Number of new points, circuits and dedicated feeds., Concealed conduit routing and finishing / making good., Whether the distribution board also needs upgrading..
DB Box Repair & Upgrade
The distribution board (DB) is where every circuit is protected and isolated. Older boards with rewireable fuses or ageing breakers may not trip reliably under fault. We help arrange DB inspection, repair and upgrade enquiries with independent electrical service providers in Penang.
Quote depends on: Whether it is a component swap or a full board replacement., Number of circuits and spare ways needed., Type of protection added — MCB, RCCB, RCBO or surge protection., Any need to re-terminate existing circuits..
Water Heater Installation
Electric water heaters — instant or storage — need a dedicated circuit, the right cable size and an isolating switch, plus secure mounting. The electrical side is distinct from the plumbing; we help arrange the electrical installation with independent electrical service providers in Penang.
Quote depends on: Whether a new dedicated circuit is needed or an existing point is reused., Cable run length and conduit routing., Isolating switch and breaker/MCB rating required., Mounting access and bathroom finish..
Inspection & Maintenance
A periodic electrical check helps catch deteriorating insulation, loose connections and missing earth protection before they become faults. We help arrange inspection and maintenance visits with independent electrical service providers for Penang homes and businesses.
Quote depends on: Property size and number of circuits to test., Whether a written report is required., Access to the board and key points., Whether follow-up repairs are requested in the same visit..
Commercial Electrical Work
Commercial premises have different demands from homes: longer operating hours, higher loads, trunking runs and the need to work around trading. We help Penang businesses arrange commercial electrical enquiries with independent service providers for shops, offices, restaurants and warehouses.
Quote depends on: Scope — a single repair, a maintenance visit or a full fit-out., Number of circuits, fittings and trunking runs., Three-phase versus single-phase work., Timing — business hours vs after hours — and access..
Call-out & inspection charges
Some providers apply a call-out or inspection charge for a visit, which may be separate from any repair work. This is normal practice. When you arrange a visit, ask whether a call-out or inspection fee applies and whether it is deducted from the repair total if you proceed — so there are no surprises.
Pricing FAQ
How much does an electrician cost in Penang?
As a guide, fitting a basic filament light at an existing point starts at RM10 in Penang. The final quote depends on the scope and any visit charges.
Is there a call-out or inspection charge?
Some providers apply a call-out or inspection charge for a visit, separate from any repair. Ask whether one applies when arranging the visit so it is clear up front.
Can I get a fixed price before a visit?
For straightforward jobs an estimate may be possible from your description. Complex faults, rewiring and board work usually need an on-site assessment before a firm quote.
Do you show prices on the site?
Yes. The price list gives a starting amount for each job. The independent electrician confirms what is included and the total for your property before you approve the work.
When do I approve the price?
After the provider assesses the work, they confirm scope and price. You approve before any repair or installation begins.
Ready for a quotation?
Describe the work and your area in Penang. We'll help you connect with a provider to confirm availability and a quote.